These blog is related to troubleshooting.

Translate



External Hard Disk Drive (HDD) case


External Hard Disk Drive (HDD) case is used to place the HDD inside the case and connect it to the computer. The case is not just an empty case but it has a supportable connection like the SATA cable with the help of the usb cable. The used of the HDD case is portable and it also reforms the functionality like the other external hard disk drive of premium quality available in the market. 



























HDD case not detectable in computer

The Hard Disk is a very sensitive types of gadgets that have to be handle with care. The HDD case is used to protect the HDD from any pressure on it and also for the convenience of connectivity. By using the HDD case it reforms the shape of the external HDD of the premium quality available in the market. One cannot connect the HDD as external drive to a computer without the SATA cable connected to the HDD. There have to be some suitable SATA cable or the drive case to connect it. Here, the HDD can directly connect to the computer after placing the drive into the case and then connect with the usb cable to the computer. Sometimes, the HDD might not detect to a computer due to different reasons. Each problems might not be the same for all, but there are some common chances that can caused such problems. Things to know that, the premium external HDD that are available in the market and the cheap quality external HDD case that are available in the market have the same functionality but there is much different in quality and durability. 











Solve the HDD case undetectable problems

First, one need to see that the HDD case indicator is blinking well or it don’t. If the indicator is blinking in a strange way and the drive is not detected to a computer, one can be sure that there is some problem in it. Try removing the usb cable from the HDD case and also from the computer and then reinsert again to case and also to the computer. 




Note: If you don’t have any alternative HDD case you can straight forward follow this steps.

Now, remove the old usb cable from the HDD case and try it with a new usb cable connecting to the HDD case to a computer.




If you have any other alternative HDD case try removing the HDD from the case and check in the alternate case to make sure the drive is in a working condition or not. If the HDD is in a working condition you will hear the disk spinning sound from the drive. After checking out all that if the HDD is in working condition, connect the HDD again to the old HDD case like before and try reconnecting to a computer. If you hear any strange sounds like unusual disk spinning sounds or a low beep sound from the case and also with off and on indicator blinking from the drive you can be sure that the case has got some problem. Now, remove the old usb cable from the HDD case and try it with a new usb cable connecting to the HDD case in a computer. I am sure that the HDD is now detected in a computer and should be working fine. Sometimes the usb cable are the caused of such problems. After trying all the methods, if the problem was not solve, you should give it to the electrical mechanics or the technicians to check the HDD case circuit board. 















I hope after going through the above explanation your problem is solve. I will be happy to hear again from all of you.